|
|
|
National Stock Number:
5315-00-664-1021
Federal Supply Class:
5315
National Item Identification Number:
006641021
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 761661 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.750 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8740 OVERALL | | PIN OVERALL DIAMETER | 0.2030 INCHES MINIMUM AND 0.2040 INCHES MAXIMUM | | PIN OVERALL LENGTH | 8.000 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 40.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 495 CLASS 2A,36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL |
|
|