|
|
|
National Stock Number:
5315-00-660-0734
Federal Supply Class:
5315
National Item Identification Number:
006600734
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 00346 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | S1436B | 16712 | SIEMENS ENERGY, INC. | | S1436B | 59180 | CIRCOR PUMPS NORTH AMERICA LLC | | S1436B9219 | 16712 | SIEMENS ENERGY, INC. | | S1436B9219 | 59180 | CIRCOR PUMPS NORTH AMERICA LLC | | SG3745PC5 | 16712 | SIEMENS ENERGY, INC. | | SG3745PC5 | 59180 | CIRCOR PUMPS NORTH AMERICA LLC | | SG3939PC5 | 16712 | SIEMENS ENERGY, INC. | | SG3939PC5 | 59180 | CIRCOR PUMPS NORTH AMERICA LLC | | SG3940PC5 | 16712 | SIEMENS ENERGY, INC. | | SG3940PC5 | 59180 | CIRCOR PUMPS NORTH AMERICA LLC | | SG3945PC5 | 16712 | SIEMENS ENERGY, INC. | | SG3945PC5 | 59180 | CIRCOR PUMPS NORTH AMERICA LLC | | SG3946PC5 | 16712 | SIEMENS ENERGY, INC. | | SG3946PC5 | 59180 | CIRCOR PUMPS NORTH AMERICA LLC |
|
Techincal Specification:
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1048 OR STEEL COMP 1049 OR STEEL COMP 1050 OVERALL | | PIN OVERALL LENGTH | 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | ONE HOLE 3/8-16 UNC THREAD 0.625 IN. DEEP CENTERED ON END ALONG LONGITUDINAL CENTERLINE | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
|
|