|
|
|
National Stock Number:
5315-00-531-0969
Federal Supply Class:
5315
National Item Identification Number:
005310969
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 5310969 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-580 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OVERALL | | PIN OVERALL DIAMETER | 0.1706 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.266 INCHES MINIMUM AND 1.297 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 1,GRADE A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL |
|
|