| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.430 INCHES NOMINAL |
| CRITICALITY CODE JUSTIFICATION | AAVH AND AAZE |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 3.031 INCHES NOMINAL |
| MATERIAL | STEEL COMP 1095 OVERALL |
| SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND SHANK DIAMETER | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2485 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| SHANK LENGTH | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.4390 INCHES MINIMUM AND 0.4395 INCHES MAXIMUM |
| SPECIAL FEATURES | BOTH SHANK ENDS CHAMFERED 0.031 IN. BY 45 DEG ON EDGES NOT CITED IN ABQL AND ABQM |
| STYLE DESIGNATOR | SHOULDER |