|
|
|
National Stock Number:
5315-00-526-4113
Federal Supply Class:
5315
National Item Identification Number:
005264113
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 14-75520-7 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-75520-7 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END LOCATION | SHOULDER END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.093 INCHES NOMINAL | | OVERALL LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 COMP 1010-1020 COND CF FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHANK DIAMETER | 0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM | | SHANK LENGTH | 0.390 INCHES MINIMUM AND 0.430 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.2490 INCHES MINIMUM AND 0.2493 INCHES MAXIMUM | | SPECIAL FEATURES | SHANK IS OFFSET 0.040 IN. FROM CENTER OF SHOULDER; GREEN LACQUER-NITROCELLULOSE PAINT END OF SHOULDER PER P.S. FP-81 | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | UNDERCUT DIAMETER | 0.140 INCHES NOMINAL | | UNDERCUT WIDTH | 0.040 INCHES NOMINAL |
|
|