|
|
|
National Stock Number:
5315-00-171-7867
Federal Supply Class:
5315
National Item Identification Number:
001717867
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 14-40493-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-40493-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 14-40493-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | OVERALL LENGTH | 1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK DIAMETER | 0.312 INCHES NOMINAL | | SECOND SHANK LENGTH | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM | | SHANK DIAMETER | 0.312 INCHES NOMINAL | | SHANK LENGTH | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.562 INCHES NOMINAL | | SPECIAL FEATURES | SHORT SHANK IS THREADED,WRENCHING FLATS ON SHOULDER 180.0 DEG APART,0.500 IN. ACROSS FLATS | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.275 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|