| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.093 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND SHANK DIAMETER | 0.2500 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.470 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| SHANK DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHANK LENGTH | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 125.000 MICROINCHES OVERALL |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |