| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| FIRST END LOCATION | THREADED END |
| FIRST HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 1.260 INCHES MINIMUM AND 1.290 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD N0. 66 300 SERIES FED STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| SECOND END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND SHANK DIAMETER | 0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SHANK DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SHANK LENGTH | 0.705 INCHES MINIMUM AND 0.725 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.250 INCHES NOMINAL |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 125.000 MICROINCHES OVERALL |
| THREAD LENGTH | 0.240 INCHES MINIMUM |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 32 |