|
|
|
National Stock Number:
5315-00-164-1022
Federal Supply Class:
5315
National Item Identification Number:
001641022
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12017M | 12603 | CLARK EQUIPMENT CO | | 12017M | 89749 | CLARK MATERIAL HANDLING COMPANY | | 16590300 | 81337 | W1D1 NATICK SOLDIER CENTER | | 604387 | 12603 | CLARK EQUIPMENT CO | | 604387 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 609730 | 12603 | CLARK EQUIPMENT CO | | 609730 | 89749 | CLARK MATERIAL HANDLING COMPANY | | CP10166 | 00994 | COLUMBUS JACK CORPORATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.438 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.375 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.312 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.8730 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.625 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.188 INCHES NOMINAL |
|
|