5310-00-153-3145 WASHER,SHOULDERED Index 5365-00-153-3148 SPACER,SLEEVE

National Stock Number:
5315-00-153-3147

Federal Supply Class:
5315

National Item Identification Number:
001533147

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.


Manufacturer Information:
29-47909-181205THE BOEING COMPANY


Techincal Specification:
CENTER TO CENTER DISTANCE BETWEEN HOLES5.500 INCHES MINIMUM AND 5.560 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END TAPER LENGTH0.180 INCHES NOMINAL
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
HOLE ARRANGEMENT STYLEBOTH END DRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4130 OVERALL
PIN OVERALL LENGTH6.380 INCHES MINIMUM AND 6.560 INCHES MAXIMUM
PIN OVERALL DIAMETER2.4700 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM
SECOND HOLE DIAMETER0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER
SURFACE FINISH250.0 MICROINCHES BOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL


Click here to Register for Free 30-day Trial