|
|
|
National Stock Number:
5315-00-147-5758
Federal Supply Class:
5315
National Item Identification Number:
001475758
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1922424PC33 | 82522 | PUGET SOUND NAVAL SHIPYARD AND INTERMEDIATE MAINTENCE FACILITY |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.391 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-16782 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OVERALL | | PIN OVERALL DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.891 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SURFACE TREATMENT | CADMIUM AND DICHROMATE OVERALL |
|
|