5360-00-145-8464 SPRING,HELICAL,COMPRESSION Index 5305-00-145-8466 SCREW,CAP,SOCKET HEAD

National Stock Number:
5315-00-145-8465

Federal Supply Class:
5315

National Item Identification Number:
001458465

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.


Manufacturer Information:
MS16555-8296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
FIRST END TAPER LENGTH0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM
PIN OVERALL DIAMETER0.5001 INCHES MINIMUM AND 0.5003 INCHES MAXIMUM
SECOND END STYLECHAMFERED
SECOND END TAPER ANGLE4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
SECOND END TAPER LENGTH0.071 INCHES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SPECIAL FEATURESSMALL CHAMFER END MAY HAVE 0.062 IN. MIN 0.125 IN. MAX RADIUS IN LIEU OF CHAMFER
SURFACE FINISH16.0 MICROINCHES OUTSIDE DIAMETER


Click here to Register for Free 30-day Trial