| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.880 INCHES NOMINAL |
| FIRST END LOCATION | SHANK END |
| FIRST HOLE DIAMETER | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 3.880 INCHES NOMINAL |
| MATERIAL | STEEL OVERALL |
| SECOND END STYLE | SQUARE |
| SECOND HOLE DIAMETER | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SHANK DIAMETER | 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| SHANK LENGTH | 0.604 INCHES MINIMUM AND 0.644 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | NONE HOLE LOCATED IN SHOULDER 0.505 IN. DIA BY 1.120 IN. DEEP |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL AND QQ-S-35,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |