|
|
|
National Stock Number:
5315-00-143-6451
Federal Supply Class:
5315
National Item Identification Number:
001436451
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8438019 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.380 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.780 INCHES MINIMUM AND 2.820 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | PIN OVERALL LENGTH | 4.440 INCHES MINIMUM AND 4.500 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.4990 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
|
|