| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.101 INCHES NOMINAL |
| EFFECTIVE LENGTH | 0.567 INCHES NOMINAL |
| DIAMETER | 0.1903 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL |
| GRIP LENGTH | 0.603 INCHES MINIMUM AND 0.613 INCHES MAXIMUM |
| HARDNESS RATING | 44.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT FILLISTER |
| HEIGHT | 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP E52100 OVERALL |
| PIN HEAD DIAMETER | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 0.699 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.025 INCHES MAXIMUM |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 32.0 MICROINCHES LONG SHANK |