|
|
|
National Stock Number:
5315-00-001-4758
Federal Supply Class:
5315
National Item Identification Number:
000014758
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 63B52568-9 | 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.359 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.516 INCHES NOMINAL | | FEATURES PROVIDED | CASEHARDENED | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1117 OVERALL | | PIN OVERALL LENGTH | 1.469 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | DRILLED HOLE ON LONGITUDINAL AXIS 0.213 IN. DIA BY 1.000 IN. DEEP W/1/4-28 UNF 3A BY 0.250 IN. DEEP TAP | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|