|
|
|
National Stock Number:
5310-12-173-0435
Federal Supply Class:
5310
National Item Identification Number:
121730435
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0004660275 | D8046 | DAIMLER AG | | 0004660275 | Z0C81 | MERCEDES-BENZ AUSTRALIA/PACIFIC PTYLTD DEALER PARTS ASSISTANCE CENTRE | | 0004660275 | Z2G22 | MERCEDES-BENZ AUSTRALIA/PACIFIC PTYLTD | | 0229340 | H0001 | DAF TRUCKS N.V. | | 02966570 | D8060 | IVECO MAGIRUS AG | | 229340 | H0001 | DAF TRUCKS N.V. | | 2966570EY5061-13 | D8060 | IVECO MAGIRUS AG | | 7632 032 102 | D8124 | ZF FRIEDRICHSHAFEN AG | | 7632032102 | D0741 | ZAHNRADFABRIK FRIEDRICHSHAFEN AG WERK SCHWAEBISCH GMUEND | | 7632032102 | D8124 | ZF FRIEDRICHSHAFEN AG |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 18,0 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN1623 | | MATERIAL | STEEL COMP 1.0330 | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 30,0 MILLIMETERS NOMINAL | | TEST DATA DOCUMENT | D0741-7632032102 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THICKNESS | 1,0 MILLIMETERS NOMINAL |
|
|