|
|
|
National Stock Number:
5310-01-590-6120
Federal Supply Class:
5310
National Item Identification Number:
015906120
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| NAS1193 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1193E7C | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| INSIDE DIAMETER | 0.443 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM | | OVERALL HEIGHT | 0.123 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | LCOKING DEVICE, POSITIVE INDEX | | SPECIAL FEATURES | THIS IS A COMPLETE DEVICE CONSITING OF THE -1 AND -2 HALVES; MATERIAL IS 17-4PH CRS, 150-170 KSI HEAT TREAT; THERE ARE 50 SERRATIONS EQUALLY SPACED ON THE FACE OF EACH OF THE TWO MATING SIDES; THE -1 SIDE HAS ACCOMIDATIONS FOR A LOCKWIRE, HOLE SIZE IS 0.062; -2 SIDE HAS A 0.082 WIDE KEYWAY EXTENDING INTO THE CENTER OF THE WASHER.;STYLE DESIGNATOR: TWO PIECE INTERLOCKING |
|
|