|
|
|
National Stock Number:
5310-01-588-8732
Federal Supply Class:
5310
National Item Identification Number:
015888732
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3011438 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 96853A295 | 2V507 | MCMASTER-CARR SUPPLY COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | HARDNESS RATING | 65.0 ROCKWELL B NOMINAL | | HOLE DIAMETER | 0.993 INCHES MINIMUM AND 1.007 INCHES MAXIMUM | | OVERALL DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | ROUND SHIMS,STANDARD | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | STAINLESS STEEL TYPE:18-8,SHIM TYPE:STANDARD | | THICKNESS | 0.127 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
|
|