|
|
|
National Stock Number:
5310-01-579-9412
Federal Supply Class:
5310
National Item Identification Number:
015799412
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| MC000016 | 55354 | UNIVERSITY OF TEXAS AT AUSTIN |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM | | OVERALL DIAMETER | 1.000 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY) WASHER, HD; HEAVY WASHER, SHORT, ARRAY MODULE MOUNT TOWED, BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B265, GRADE 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2488D TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.305 INCHES NOMINAL |
|
|