|
|
|
National Stock Number:
5310-01-578-7873
Federal Supply Class:
5310
National Item Identification Number:
015787873
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12590268 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | LS1046423 | 01417 | GENERAL DYNAMICS LAND SYSTEMS INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | COLOR | GREEN OVERALL | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | HOLE DIAMETER | 0.859 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-12560 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.969 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PAINT OVERALL | | THICKNESS | 0.250 INCHES NOMINAL |
|
|