|
|
|
National Stock Number:
5310-01-565-2081
Federal Supply Class:
5310
National Item Identification Number:
015652081
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 602 250 | 3BH04 | MILLER ELECTRIC MFG. LLC | | 602 250 | 40608 | MILLER ELECTRIC MFG CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.812 INCHES NOMINAL | | OVERALL DIAMETER | 1.469 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | USED ON THE OUTSIDE OF EACH WHEEL AS A BEARING SURFACE. | | THICKNESS | 0.134 INCHES NOMINAL |
|
|