|
|
|
National Stock Number:
5310-01-563-4856
Federal Supply Class:
5310
National Item Identification Number:
015634856
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 802071 | 29780 | MAG AEROSPACE INDUSTRIES, LLC | | 802071 | 92824 | MAG AEROSPACE INDUSTRIES INC. DBA MONOGRAMSYSTEMS DBA MONOGRAM SYSTEMS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.257 INCHES NOMINAL | | OVERALL DIAMETER | 0.372 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
|
|