4920-01-563-3897 ADAPTER,TEST Index 5995-01-563-3899 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5310-01-563-3898

Federal Supply Class:
5310

National Item Identification Number:
015633898

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
250890881JTT1SPECIALTY RESOURCES, INC.
2508908889619MACK TRUCKS, INC.
35AX 125289619MACK TRUCKS, INC.
35AX125289619MACK TRUCKS, INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.688 INCHES NOMINAL
OVERALL DIAMETER1.125 INCHES NOMINAL
MATERIALSTEEL BODY
PERIPHERAL SHAPE STYLEROUND
SPECIAL FEATURESUSED ON AXLE ASSEMBLY AUTO INTERMEDIATE P/N 29SP271 NSN 2520-01-537-2696 AND AXLE ASSEMBLY AUTOM REAR P/N 29SP272 NSN 2520-01-537-2697
THICKNESS0.125 INCHES NOMINAL


Click here to Register for Free 30-day Trial