1005-01-546-2646 ALUMINUM TEE PIPE Index 5310-01-546-2648 WASHER,FLAT

National Stock Number:
5310-01-546-2647

Federal Supply Class:
5310

National Item Identification Number:
015462647

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
BACW10BP142C58009MOELLER MANUFACTURING & SUPPLY, LLC
BACW10BP142C81205THE BOEING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.910 INCHES NOMINAL
INSIDE LEFT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
OVERALL DIAMETER1.448 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6350,AMS6351 OR AMS6345 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4130 OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIAL FEATURESO/S COUNTERSUNK WASHER .0312
THICKNESS0.090 INCHES NOMINAL


Click here to Register for Free 30-day Trial