|
|
|
National Stock Number:
5310-01-537-5805
Federal Supply Class:
5310
National Item Identification Number:
015375805
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| MS14183L-C8 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM14183 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.501 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | INSIDE LEFT CORNER CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | OVERALL DIAMETER | 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
|