| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5080 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4122 ASSN STD SINGLE MATERIAL RESPONSE CLIP |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855, CLASS 1, GRADE 60 OR 70 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC 1ST MATERIAL RESPONSE SHELL OR AMS 4122 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| MATERIAL | ALUMINUM ALLOY 7075 SHELL |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL COMP 1035 CAP OR STEEL COMP 1050 CAP |
| MATERIAL | STEEL COMP 1035 NUT OR STEEL COMP 1050 NUT |
| MATERIAL | STEEL COMP 302 CLIP |
| PLATE WIDTH | 0.090 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| NUT LENGTH | 0.710 INCHES MAXIMUM |
| NUT HEIGHT | 0.798 INCHES MAXIMUM |
| NUT STYLE | PLATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE II, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE CLIP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE CAP |
| SURFACE TREATMENT | CADMIUM CAP AND PLASTIC POLYURETHANE CAP |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | ANODIZE CLIP |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES | UNJF |