|
|
|
National Stock Number:
5310-01-528-1025
Federal Supply Class:
5310
National Item Identification Number:
015281025
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4081883CLJ | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.774 INCHES MINIMUM AND 0.784 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5553 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 201 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER-RING | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.070 INCHES MINIMUM AND 1.080 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | THICKNESS | 0.145 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
|
|