|
|
|
National Stock Number:
5310-01-525-9310
Federal Supply Class:
5310
National Item Identification Number:
015259310
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4D0466W24-1 | 88277 | THE BOEING COMPANY | | 7D0466W24-1 | 88277 | THE BOEING COMPANY | | EFWA24A0-1A | 51439 | FATIGUE TECHNOLOGY INC | | EFWA24A0-1B | 51439 | FATIGUE TECHNOLOGY INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.322 INCHES NOMINAL | | OVERALL DIAMETER | 2.862 INCHES MINIMUM AND 2.894 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4124, TYPE 7075-T73 OR T7351 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE I OR II B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.310 INCHES NOMINAL |
|
|