|
|
National Stock Number: 5310-01-523-7134
Federal Supply Class: 5310
National Item Identification Number: 015237134
Description: WASHER,FLAT
Detail: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
140-009H23T31 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
HOLE DIAMETER | 0.359 INCHES NOMINAL | OVERALL DIAMETER | 0.484 INCHES NOMINAL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED STD ALL MATERIAL RESPONSES OVERALL | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 OR CHEMICAL FILM PER MIL-C-5541 MIL SPEC ALL TREATMENT RESPONSES OVERALL | SURFACE TREATMENT | ANODIZE OVERALL | THICKNESS | 0.010 INCHES NOMINAL |
|
|