5310-01-523-0179 WASHER,FLAT Index 5310-01-523-0181 WASHER,FLAT

National Stock Number:
5310-01-523-0180

Federal Supply Class:
5310

National Item Identification Number:
015230180

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
BACW10BP31ACU81205THE BOEING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.204 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
INSIDE LEFT CORNER CHAMFER ANGLE45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALIRON ALLOY 660 OVERALL
III MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH
III PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, COUNTERSUNK
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.369 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
SPECIAL FEATURESHEAT TREAT TO MINIMUM TENSILE STRENGTH PER AMS-H-6875; SERVICE TEMPERATURE 1200.0 DEGREES F; USED ON GEAR INSTALLATION-SECTION 62 NLG. VAR.
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS-QQ-P-35, TYPE II OR TYPE VIII ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM


Click here to Register for Free 30-day Trial