|
|
|
National Stock Number:
5310-01-521-8490
Federal Supply Class:
5310
National Item Identification Number:
015218490
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12-30722-2 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 1.410 INCHES NOMINAL | | OVERALL DIAMETER | 2.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE AMS6349 ASSN STD ALL MATERIAL RESPONSES OR SAE AMS6382 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY) WASHER PISTON ASSEMBLY LAUNCHING ENGINE | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.281 INCHES NOMINAL |
|
|