5310-01-518-7062 WASHER,FLAT Index 5310-01-518-7064 WASHER,FLAT

National Stock Number:
5310-01-518-7063

Federal Supply Class:
5310

National Item Identification Number:
015187063

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
4AG331N5S7CRITICAL SOLUTIONS INTERNATIONAL, LLC
92148A07039428MCMASTER-CARR SUPPLY CO


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING85.0 ROCKWELL B NOMINAL
HOLE DIAMETER2.9 MILLIMETERS NOMINAL
OVERALL DIAMETER5.1 MILLIMETERS NOMINAL
MATERIALSTEEL COMP 316 OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.6 MILLIMETERS MINIMUM


Click here to Register for Free 30-day Trial