5970-01-518-2696 INSULATOR,PLATE Index 5330-01-518-2698 GASKET

National Stock Number:
5310-01-518-2697

Federal Supply Class:
5310

National Item Identification Number:
015182697

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
350174045152OSHKOSH CORP
350174075Q65OSHKOSH DEFENSE LLC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
COLORNATURAL OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.312 INCHES NOMINAL
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.750 INCHES NOMINAL
SPECIAL FEATURESLOW CARBON STEEL MATERIAL WITH FINISH OF ZINC AND CLEAR
SURFACE TREATMENTZINC OVERALL
THICKNESS0.065 INCHES NOMINAL


Click here to Register for Free 30-day Trial