4920-01-518-1840 V BLOCK,AIRCRAFT,MA Index 5905-01-518-1842 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5310-01-518-1841

Federal Supply Class:
5310

National Item Identification Number:
015181841

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
NAS1149FN216P80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.099 INCHES NOMINAL
OVERALL DIAMETER0.250 INCHES NOMINAL
MATERIALSTEEL COMP 1025 OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM OVERALL
THICKNESS0.016 INCHES NOMINAL


Click here to Register for Free 30-day Trial