|
|
National Stock Number: 5310-01-516-1450
Federal Supply Class: 5310
National Item Identification Number: 015161450
Description: WASHER,FLAT
Detail: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
66336-10P | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
CENTER HOLE SHAPE STYLE | ROUND | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM | HOLE DIAMETER | 0.627 INCHES MINIMUM AND 0.631 INCHES MAXIMUM | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL AND AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | IRON ALLOY 660 OVERALL | PERIPHERAL SHAPE STYLE | ROUND | PROPRIETARY CHARACTERISTICS | PACS | OVERALL DIAMETER | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | PASSIVATE OVERALL | THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
|
|