5935-01-484-4775 BACKSHELL,ELECTRICAL CONNECTOR Index 5340-01-484-4777 PLATE,MOUNTING

National Stock Number:
5310-01-484-4776

Federal Supply Class:
5310

National Item Identification Number:
014844776

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
28761NWY2INDEPENDENT ROUGH TERRAIN CENTER LLC
CC-00095641NWY2INDEPENDENT ROUGH TERRAIN CENTER LLC
CV174380KCQ24TVS SUPPLY CHAIN SOLUTIONS LTD
ST01238X883K7325DANDO DRILLING INTERNATIONAL LTD


Techincal Specification:
MATERIALSTEEL OVERALL
SPECIAL FEATURESMATERIAL: LOW CARBON STEEL - MIN 350 HR WHITE RUST RESISTANCE


Click here to Register for Free 30-day Trial