5930-01-484-0731 SWITCH,SENSITIVE Index 5998-01-484-0733 CIRCUIT CARD ASSEMBLY

National Stock Number:
5310-01-484-0732

Federal Supply Class:
5310

National Item Identification Number:
014840732

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
122-6722636 PC 2653711NAVAL SEA SYSTEMS COMMAND
122-6818602 PC 4453711NAVAL SEA SYSTEMS COMMAND
672263653711NAVAL SEA SYSTEMS COMMAND
681860253711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.281 INCHES NOMINAL
OVERALL DIAMETER0.625 INCHES NOMINAL
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.0625 INCHES NOMINAL


Click here to Register for Free 30-day Trial