|
|
National Stock Number: 5310-01-483-2973
Federal Supply Class: 5310
National Item Identification Number: 014832973
Description: WASHER,RECESSED
Detail: A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
MS21299-C5K | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM | HOLE DIAMETER | 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM | OUTSIDE DIAMETER | 0.588 INCHES MINIMUM AND 0.598 INCHES MAXIMUM | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5604,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM | MATERIAL | STEEL COMP 630 OVERALL | RECESS ANGLE | 45.0 DEGREES NOMINAL | RECESS DIAMETER | 0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM | STYLE DESIGNATOR | RECESSED | SURFACE FINISH | 125.0 MICROINCHES ALL SURFACES | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|