5331-01-483-2870 O-RING Index 5310-01-483-2873 WASHER,KEY

National Stock Number:
5310-01-483-2872

Federal Supply Class:
5310

National Item Identification Number:
014832872

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
722584553711NAVAL SEA SYSTEMS COMMAND
D1403103D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER10.5 MILLIMETERS NOMINAL
MATERIALNICKEL ALLOY OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER17.5 MILLIMETERS NOMINAL
SURFACE FINISH3.2 MICROMETERS ALL SURFACES
THICKNESS2.2 MILLIMETERS NOMINAL


Click here to Register for Free 30-day Trial