|
|
|
National Stock Number:
5310-01-353-9539
Federal Supply Class:
5310
National Item Identification Number:
013539539
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S3202-6 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.450 INCHES MAXIMUM | | OVERALL DIAMETER | 0.700 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5604 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.0617 INCHES MINIMUM AND 0.0643 INCHES MAXIMUM |
|
|