|
|
|
National Stock Number:
5310-01-353-5124
Federal Supply Class:
5310
National Item Identification Number:
013535124
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 3180971-7 | 02602 | AEROJET ROCKETDYNE OF DE, INC | | 3180971-7 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.707 INCHES MINIMUM AND 0.719 INCHES MAXIMUM | | HOLE DIAMETER | 0.631 INCHES MINIMUM AND 0.641 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.060 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.082 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY K-500 OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.707 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
|
|