5310-01-352-9570, WASHER,FLAT

National Stock Number:
5310-01-352-9570

Federal Supply Class:
5310

National Item Identification Number:
013529570

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10122232	A486G	NIMIKKEISTOKESKUS NCB FINLAND
5310PL0572187	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
ASNA2397KD10L	F6198	AIRBUS OPERATIONS
NAS1149D0332K	10630	ANILLO INDUSTRIES INC
NAS1149D0332K	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1149D0332K	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NAS1149D0332K	A0126	LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE
NAS1149D0332K	A0311	TECNO TRADE S.R.L.
NAS1149D0332K	AC910	AERTEKNO S.R.L.

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
OVERALL DIAMETER	0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	80205-NAS1149 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OVERALL
THICKNESS	0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM

Click here to Register for Free 30-day Trial