|
|
|
National Stock Number:
5310-01-352-9564
Federal Supply Class:
5310
National Item Identification Number:
013529564
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10122230 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310PL0730659 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | NAS1149D0463K | 10630 | ANILLO INDUSTRIES INC | | NAS1149D0463K | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1149D0463K | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | OVERALL DIAMETER | 0.495 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 80205-NAS1149 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
|
|