|
|
|
National Stock Number:
5310-01-349-9645
Federal Supply Class:
5310
National Item Identification Number:
013499645
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S9011F353-030A | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.530 INCHES MINIMUM AND 0.550 INCHES MAXIMUM | | OVERALL DIAMETER | 0.600 INCHES MINIMUM AND 0.670 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | G5041,CAGEC 99193 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.030 INCHES NOMINAL |
|
|