|
|
|
National Stock Number:
5310-01-349-9634
Federal Supply Class:
5310
National Item Identification Number:
013499634
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 03A257-4 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A257-4 | 3G1W3 | BOEING DISTRIBUTION SERVICES DEFENSE LLC | | 03A257-4 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | AS19879-4 | 10630 | ANILLO INDUSTRIES INC | | MM118-4 | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | MS14183L-4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NS202860-4 | 80539 | SPS TECHNOLOGIES, LLC | | NS202860-4 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VN948-4 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VN948NP4 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.251 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | OVERALL DIAMETER | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5596 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OR NICKEL ALLOY 718 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
|
|