|
|
|
National Stock Number:
5310-01-344-4333
Federal Supply Class:
5310
National Item Identification Number:
013444333
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 741711 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.581 INCHES MINIMUM AND 0.586 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | RECESS ANGLE | 84.0 DEGREES MAXIMUM | | RECESS DIAMETER | 0.349 INCHES MINIMUM AND 0.369 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED |
|
|