|
|
|
National Stock Number:
5310-01-342-4661
Federal Supply Class:
5310
National Item Identification Number:
013424661
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 651-1394-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| BOSS DIAMETER | 0.162 INCHES MINIMUM AND 0.166 INCHES MAXIMUM | | BOSS THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | COUNTERBORE DIAMETER | 0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM FIRST END | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | NUT COUNTERBORE DEPTH | 0.100 INCHES NOMINAL FIRST END | | NUT DIAMETER | 0.250 INCHES NOMINAL | | NUT LENGTH | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A,CD ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | SPECIAL FEATURES | BOSS 0.1625 IN. MIN,0.1645 IN. MAX DIA,OPPOSITE END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 40 |
|
|