|
|
|
National Stock Number:
5310-01-341-8811
Federal Supply Class:
5310
National Item Identification Number:
013418811
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 063-140-020 | 85446 | BOKERS INC | | 759-006-019 | 26055 | PARKER-HANNIFIN CORP | | 759-006-019 | 59211 | PARKER-HANNIFIN CORPORATION | | B20069A | 77264 | PHOENIX SPECIALTY MFG CO INC | | WFW-SS-0063-3-0135-015 | 84992 | INDUSTRIAL FASTENERS CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.063 INCHES MINIMUM AND 0.066 INCHES MAXIMUM | | OVERALL DIAMETER | 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
|
|