5310-01-265-7090 WASHER,FLAT Index 5310-01-265-7092 WASHER,SPRING TENSION

National Stock Number:
5310-01-265-7091

Federal Supply Class:
5310

National Item Identification Number:
012657091

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
120002-003899657MAROTTA CONTROLS INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
MATERIALSTEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 322 OVERALL OR STEEL COMP 324 OVERALL OR STEEL COMP 347 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.482 INCHES MINIMUM AND 0.488 INCHES MAXIMUM
THICKNESS0.050 INCHES NOMINAL


Click here to Register for Free 30-day Trial